For divining fresh water, you’ll need a system that allows you to frequently sip on the steam-distilled water. You can use a fancy bladder system available from most outdoor adventure stores. But there must be NO metal fixtures on the bladder system or straps.

George uses a much simpler system – hanging a plastic or glass bottle filled with steam-distilled water around his neck and uses a long plastic tube for a straw. You can easily make this at home with any plastic or glass bottle, plastic tubing, and a piece of lightweight rope. Leave the rope and tubing at an adjustable length until you decide the most comfortable position for you. If you have neck problems, you’ll need to hang the bottle so the rope goes across the chest rather than around your neck, as you’ll need to be comfortable to focus on the Divining Method.

An important part of the Divining Method is priming your ‘mouth’!

The key is to take a sip of the steam-distilled water, and without swallowing, hold the steam distilled water in your mouth. Holding the water in your mouth helps guide the Divining Tool and improve accuracy of the Divining Method. Take small sips only so it’s more comfortable to hold in your mouth. Hold each sip in your mouth for approximately 5 minutes maximum, possibly starting with smaller time intervals and building up to the 5-minute mark. The time frame is not important, only the quality and ‘freshness’ of the steam distilled water. Change the water in your mouth at regular intervals to maintain freshness.

Swallowing the water each time helps to maintain hydration so you don’t get thirsty while divining for water!

1.    Caring for your Divining Tool

1. Keep tool protected from dust and sand. Store tool in cloth bag.
2. Never immerse tool in tap water. Never use tool during rainstorms.

2.    Be Metal Free!

Wear cotton clothing, wide-brim hat, and closed-in shoes. Clothes, hat, and shoes all need to be metal free! For example: no metal zips, eyelets, or buttons. Mobile phone pstays in your vehicle. Spectacles allowed.

3.    Assemble and Use Specialised Sipping System when Divining.

You need a system that allows frequent sipping on steam-distilled water. Easily made at home, get a plastic or glass bottle filled with steam-distilled water, attach some lightweight rope, and hang bottle around your neck. Use long plastic tubing for a straw. When divining, regularly take small sips of steam-distilled water, and without swallowing, hold steam-distilled water in your mouth. Holding water in your mouth helps improve accuracy of Divining Tool.

4.    Preparation and Priming for Divining for Fresh Water

On location follow these steps:

1. Prime the Divining Tool by immersing tool in steam-distilled water. Let air-dry.
2. Rinse your hands in steam-distilled water.

5.    Correct Grip and Divining Position

Please ensure correct grip for proper operation:

1. Using preferred hand, grab the narrow handle of Divining Tool with your four fingertips, pressing handle of tool into palm of your hand. *DO NOT grab handle by wrapping your fingers around handle.
2. Thumb rests gently on your top of fingers.
3. Use firm enough grip to ensure narrow handle of tool remains upright, but loose enough grip that head of tool can turn side-to-side (left or right).
4. Hold tool with elbow of your divining arm bent at approximately 90 degrees. Find a comfortable position.
5. Position head of tool pointing straight ahead, with handle upright.

6.    Learning Basic Divining Method

Learn and practice divining on known underground water pipe (or garden hose) filled with running water by following these steps:

1. Follow preparation and priming instructions, and use sipping system.
2. Adjust rotating barrel of tool fully clockwise so Position #1 meets notch.
3. Hold tool with correct grip and arm positioning described above.
4. Slowly walk across underground pipe. (Repeat several times)
5. Head of tool should signal water by turning left or right as you step over pipe.
6. Re-position head of tool in forward starting position each time you cross over pipe. Adjust grip to allow tool to turn.
7. Adjust rotating barrel of tool on subsequent crossovers, until you feel maximum pull. The pull is described as amount tool turns toward water.
8. Numbers on barrel indicate water depth (1 = shallowest; 8 = deepest).

See the components of the Divining Tool HERE.

See why you need STEAM-DISTILLED WATER HERE and HERE.